دپارتمان مهندسی مکانیک ایران

انجمن مهندسی مکانیک

انجمن تست های غیر مخرب

انجمن علمی مهندسی پزشکی

انجمن بیومکانیک

آموزش تعمیر تجهیزات پزشکی

آموزش تعمیرات تجهیزات پزشکی

دوره های مهندسی پزشکی

دوره های آموزشی مهندسی پزشکی

انجمن مهندسی پزشکی

آموزش تعمیر تجهیزات دندانپزشکی

آموزش بازرسی جوش

آموزش پایپینگ


             

The direction decoupled Quiet Direct Simulation method for rapid simulation of axisymmetric inviscid unsteady flow in pulsed pressure chemical vapour deposition

Abstract

Pulsed Pressure–Chemical Vapour Deposition (PP–CVD) is a thin film deposition process which employs a highly unsteady flow with wide dynamic range of pressure. The large, time-varying density gradient during a PP–CVD process cycle produces a flow field in which the Knudsen number varies from the near-continuum to the rarefied regimes, making Direct Simulation Monte Carlo (DSMC) prohibitively expensive. The present directional decoupled Quiet Direct Simulation (DD-QDS) method is a novel kinetic-based flux scheme that computes fluxes of mass, momentum and energy at the interface of computational cells in a highly computationally efficient manner. The Maxwell–Boltzmann equilibrium distribution is enforced locally at each computational cell at each time step. In this paper, an axisymmetric second order directional decoupled QDS scheme is used to simulate highly unsteady flows encountered in PP–CVD reactor. Two simulations were conducted to investigate the PP–CVD reactor flow field at 1 Pa and 1 kPa reactor base pressures. The assumption of the local Maxwell–Boltzmann equilibrium distribution used in the QDS scheme is verified by examining the gradient length local Knudsen number based on the density, and by estimating the average number of molecular collisions within each computational cell in one computational time step. The validity of the local equilibrium assumption is found satisfactory at 1 kPa reactor based pressure but not at 1 Pa. The limitation of the QDS scheme in modelling PP–CVD flow was also investigated. The time required to establish the quasi-steady under-expanded jet is found to be ∼4 ms, and the jet dissipates within 0.5 ms of the end of injection. This important information is required to set up PP–CVD operating conditions which give uniform film deposition.

Keywords

  • QDS;
  • Gas kinetic solver;
  • Shock-bubble interaction;
  • Forward-facing cylinder;
  • Numerical dissipation;
  • PP–CVD

دانلود مقاله کامل -- ویژه اعضای طلایی

alt

 جهت اطلاع از نحوه ارتقا عضویت طلایی به

آپشن اعضای طلایی مراجعه فرمایید

 
سامانه هوشمند ژورنال مقالات